To Next PageTo Next PageWhy is my Panasonic Cordless Telephone battery flashing after charging?
If you fully charged the batteries of your Panasonic Cordless Telephone, but the battery icon still flashes, the display shows '0', or the operating time is shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. If the issue persists, it may be time to replace the batteries.
How to fix no dial tone on Panasonic Cordless Telephone?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, ensure the base unit’s AC adaptor or telephone line cord is properly connected. If the connections are correct, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/ telephone company.
Why is my Panasonic KX-TG6513B not ringing?
If your Panasonic Cordless Telephone handset does not ring, check that the ringer volume is not turned off and adjust it. Also, make sure silent mode is turned off.
What to do if my Panasonic KX-TG6513B is not working?
If your Panasonic Cordless Telephone unit isn't working, ensure the batteries are installed correctly. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it. Also, the handset may not be registered to the base unit, so register the handset.
How to correct the time on my Panasonic Cordless Telephone?
If the time on your Panasonic Cordless Telephone has shifted, it could be due to incorrect time information from incoming Caller ID. Set the time adjustment to “Manual” (off).
Why is there noise on my Panasonic KX-TG6513B?
If you're hearing noise or the sound cuts in and out on your Panasonic Cordless Telephone, it could be due to electrical interference. Try repositioning the base unit and using the handset away from sources of interference. Alternatively, move closer to the base unit. If you have DSL/ADSL, consider using a DSL/ADSL filter between the base unit and the telephone line jack.
Why is caller ID delayed on my Panasonic Cordless Telephone?
If caller information is displayed or announced late on your Panasonic Cordless Telephone, it may be due to your service provider, who may display or announce the caller’s information at the 2nd ring or later. Also, try moving closer to the base unit.
What does a slowly flashing indicator mean on my Panasonic KX-TG6513B Cordless Telephone?
If the indicator on the handset of your Panasonic Cordless Telephone flashes slowly, it means new messages or new voice mail messages have been recorded. Listen to the new messages or listen to the new voice mail messages.
Why is caller ID not announced on my Panasonic Cordless Telephone?
If caller information is not announced on your Panasonic Cordless Telephone, ensure the handset or base unit’s ringer volume is not turned off and adjust it. Also, verify that the Talking Caller ID feature is turned on. Check that the number of rings for the answering system is not set to “2 rings” or “Toll saver”, and select a different setting. If the base unit and another handset are having an intercom call, your handset will not announce caller information.
What to do if Panasonic Cordless Telephone handset does not turn on?
If the handset of your Panasonic Cordless Telephone doesn't turn on even after installing charged batteries, place the handset on the base unit or charger to turn it on.
General| Type | DECT telephone |
|---|---|
| Intercom | Yes |
| Answering machine | No |
| Phonebook capacity | 50 entries |
| Redial list capacity | 5 |
| User memory phonebook | 16 |
| Backlight color | White |
| Display number of lines | 1 lines |
| Display size (HxV) (imperial) | 1.8 x 1.8 \ |
| Frequency band | 1.9 GHz |
| Channels quantity | 60 channels |
| Mounting type | Desk |
| Product color | Black |
| Battery type | AAA |
| Standby time | 264 h |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Battery recharge time | 7 h |
| Number of batteries supported | 2 |
Weight and Dimensions| Base weight | 328 g |
|---|---|
| Handset weight | 130 g |
| Base dimensions | 157 x 152 x 91 mm |
| Handset dimensions (WxDxH) | 48 x 33 x 167 mm |
Crucial safety warnings and precautions for product use.
Guidelines for safe operation, medical considerations, and installation.
Instructions for safe battery use, charging, and disposal.
Step-by-step guide for initial setup, connections, and battery charging.
Identification and explanation of controls on the handset and base unit.
Configuration of dialing mode and setting the current date and time.
Instructions for making calls using the handset, speakerphone, and redial list.
Procedures for answering calls with the handset or base unit.
Using Hold, Mute, and Flash functions during calls.
Functionality of the shared phonebook for storing and dialing contacts.
Using specific codes to access and set features directly.
Detailed list of feature codes and their corresponding settings.
Settings specific to the answering system functionality.
Setting alarms and managing silent mode periods.
Blocking unwanted callers and managing the call block list.
Introduction to Caller ID compatibility and service requirements.
Functionality, memory capacity, and basic operation of the answering system.
How to enable or disable the answering system via base unit or handset.
Setting and managing the code for remote access.
Detailed steps for remote operation and voice guidance.
Adjusting ring count, recording time, and greeting options.
Common error messages and their corresponding troubleshooting steps.
Step-by-step solutions for general use and programmable setting issues.
Solutions for battery recharge problems and call reception issues.
