To Next PageTo Next PageWhy is caller information slow to display on my Panasonic Telephone?
Caller information may be slow to display on your Panasonic Telephone because, depending on your service provider/telephone company, the unit may display the caller’s information at the 2nd ring or later. Set the first ring to 'Off'. Also, try moving closer to the base unit.
Why doesn't the base unit of my Panasonic Telephone ring?
If the base unit of your Panasonic Telephone does not ring, the ringer volume may be turned off. Adjust the ringer volume.
Why my Panasonic KX-TG6821E Cordless Telephone does not work?
If your Panasonic Cordless Telephone is not working, ensure the batteries are installed correctly. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it and try again. The handset might not be registered to the base unit, so register the handset.
What to do if Panasonic KX-TG6821E handset does not turn on?
If your Panasonic Cordless Telephone handset doesn't turn on, even with charged batteries, try these steps: Place the handset on the base unit or charger. Ensure the batteries are correctly installed. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset, then reconnect the adaptor and try again. Also, the handset may not be registered to the base unit; in this case you should register it.
Why is my Panasonic Telephone not recording new messages?
If your Panasonic Telephone is not recording new messages, ensure that the answering system is turned on. If the message memory is full, erase unwanted messages. Check if the recording time is set to 'Greeting Only' and change the setting if needed. If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit’s number of rings setting or contact your service provider/telephone company.
Why I cannot make a call from my Panasonic Telephone?
If you cannot make a call on your Panasonic Telephone, you may have dialled a call restricted number. Also, verify that the key lock feature is turned off.
Why is my Panasonic Telephone base unit beeping?
If the base unit of your Panasonic Telephone is beeping, it indicates that new messages have been recorded. Listen to the new messages.
Why can't I hear a dial tone on my Panasonic Telephone?
If you cannot hear a dial tone on your Panasonic Telephone, ensure that you are using the supplied telephone line cord, as your old cord may have a different wiring configuration. Check that the base unit’s AC adaptor or telephone line cord is connected properly. To further diagnose the issue, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, the unit may need repair. If the working telephone does not operate properly, contact your service provider/telephone company.
How to fix caller ID not showing on Panasonic Telephone?
If caller information is not displayed on your Panasonic Telephone, make sure that you subscribe to a Caller ID service. Also, if your unit is connected to any additional telephone equipment, remove it and plug the unit directly into the wall jack. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack. Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again.
Why does my Panasonic Telephone flash after fully charging the batteries, or why is the operating time shorter?
General| Model | KX-TG6821E |
|---|---|
| Number of Handsets | 1 |
| Expandable up to | 6 |
| Answering Machine | Yes |
| Recording Time | 18 minutes |
| Talk Time | 15 hours |
| Standby Time | 170 hours |
| Caller ID | Yes |
| DECT Technology | Yes |
| GAP compatible | Yes |
| Call Waiting | Yes |
| Redial | Yes |
| Speakerphone | Yes |
| Intercom | Yes |
| Conference Call | Yes |
| Headset Jack | Yes |
| Weight (Handset) | 120 g |
| Type | DECT Cordless Phone |
| Range | 300 m outdoors, 50 m indoors |
| Display | 1.8 inch LCD |
| Battery Type | Ni-MH |
Details the different models and their components, including base units and handsets.
Compares key features like answering system and intercom across various product models.
Lists supplied and optional accessories with their part numbers and quantities.
Provides details on product design, compliance with regulations, and contact information.
Critical safety warnings regarding power connection, installation, and usage to prevent injury.
Guidelines for handling, charging, and using the rechargeable Ni-MH batteries.
Advice on base unit placement and environmental factors for optimal communication.
Instructions for cleaning and maintaining the product's outer surface.
Guidance on collecting and disposing of old electrical equipment and batteries responsibly.
Step-by-step guide for connecting the base unit, charger, and telephone line.
Instructions on how to charge handset batteries and interpret battery level indicators.
Identifies and explains the buttons and features of the handset and base unit.
Explains the icons and indicators shown on the handset display during operation.
Guides through setting the display language, date, and time for the unit.
Details the function and usage of the Smart Function Key for quick feature access.
Instructions on how to dial numbers, use the speakerphone, and adjust volume.
Steps to answer incoming calls and use the Smart Function Key for answering.
Explains call hold, mute, recall/flash, and call waiting functions.
How to use the NR key to improve voice clarity by reducing background noise.
Instructions on how to lock and unlock the handset to prevent accidental use.
Step-by-step guide to storing names and phone numbers in the shared phonebook.
How to search for and dial numbers stored in the phonebook.
Using the phonebook to dial numbers during an active call, e.g., for calling cards.
Assigning phone numbers to dial keys for quick access, either manually or from phonebook.
Modifying existing speed dial entries, including name and phone number.
Overview of customizing unit features via display menus or direct command codes.
Setting alarms with text memos, different sounds, snooze options, and recurring types.
Configuring periods when the handset will not ring for outside calls.
Setting up lists to reject calls from specific numbers, based on Caller ID.
Steps for pairing new handsets with the base unit for system expansion.
Requirements and basic features of the Caller ID service for displaying caller information.
Viewing received calls, missed calls, and phonebook matches.
Modifying phone numbers from the caller list before calling back.
Explains the system's capabilities, memory capacity, and basic operation.
Instructions for enabling or disabling the answering system on the base unit and handset.
How to listen to callers leaving messages and optionally answer the call.
Steps for recording a personalized greeting message for callers.
How to access and play new or all recorded messages via the handset.
Setting up audible alerts or calls to notify users of new messages.
Setting and using a code to access messages and settings remotely.
Adjusting the maximum recording time allowed for each caller's message.
Explains the automatic answering service provided by the service provider/telephone company.
Instructions for making and answering intercom calls between handsets.
How to find a misplaced handset by paging it from the base unit.
Procedures for transferring outside calls or setting up conference calls.
Guide to using dial keys for text input in various character modes.
Explains common error messages displayed by the unit and their potential solutions.
Provides solutions for common problems encountered during general use and settings.
Details the warranty terms and conditions applicable to the product.
