Panasonic KX-TG7210E - Date and Time; Setting up the Unit before Use

Preparation
14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Setting up the unit
before use
Display language
1
{ih} i {j/OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 Press {^} or {V} to select “Display
Setup”. i {>}
4 Press {^} or {V} to select “Select
Language”. i {>}
5 Press {^} or {V} to select the
desired language. i {>} i
{ih}
Note:
L If you select a language you cannot
read: {ih} i {j/OK} i {^} 3
times i {>} i {V} 2 times i
{>} 2 times i {^}/{V}: Select the
desired language. i {>} i
{ih}
Date and time
1
{j/OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 Proceed with the operation for your
model.
■ KX-TG7210/KX-TG7212/
KX-TG7213/KX-TG7214
Press {^} or {V} to select “Set
Date & Time”. i {>}
■ KX-TG7230/KX-TG7232/
KX-TG7233/KX-TG7234
Press {^} or {V} to select “Time
Settings”. i {>} i Press
{^} or {V} to select “Set Date &
Time”. i {>}
4 Enter the current date, month, and
year.
Example: 17 May, 2007
{1}{7} {0}{5} {0}{7}
5 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
6 {j/OK} i {ih}
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG7210-7230E(e).book Page 14 Tuesday, October 16, 2007 12:59 PM