To Next PageTo Next PageWhat to do if I fully charged the batteries, but the operating time seems shorter on my Panasonic KX-TG7301NZ Cordless Telephone?
Clean the battery ends and the charge contacts with a dry cloth, and charge again.
What to do if I cannot hear a dial tone on my Panasonic Cordless Telephone?
Check that the base unit’s AC adaptor and telephone line cord are properly connected. If you're using a splitter, remove it and connect the unit directly to the wall socket to see if the splitter is the cause.
Why does my Panasonic Cordless Telephone handset beep and/or flash 3 times?
This indicates that the battery charge is low. Fully charge the batteries.
What to do if the Panasonic KX-TG7301NZ handset does not ring?
The ringer volume may be turned off. Adjust the ringer volume.
What to do if the handset display is blank on my Panasonic Cordless Telephone?
The handset may not be turned on. Turn the power on.
Why does the unit ring and stop recording while recording a greeting message or listening to messages on my Panasonic KX-TG7301NZ Cordless Telephone?
A call is being received. Answer the call and try again later.
Why can't I operate the answering system remotely on my Panasonic KX-TG7301NZ?
Ensure you are entering the correct remote access code. Press each key firmly. The answering system may be turned off, so turn it on. If you are using a rotary/pulse telephone, try again using a touch-tone phone.
What happens if liquid enters the handset/base unit of my Panasonic KX-TG7301NZ?
Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use.
Why can't I register a handset to a base unit on my Panasonic KX-TG7301NZ Cordless Telephone?
The maximum number of handsets (6) may already be registered to the base unit, so cancel unused handset registrations from the base unit. Place the handset and the base unit away from other electrical appliances.
What to do if my Panasonic KX-TG7301NZ does not record new messages?
First, ensure the answering system is turned on. If it is, the message memory might be full, so erase unnecessary messages. Also, check if the recording time is set to “Greeting Only” and change the setting if needed.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG7301NZ |
| Type | Cordless Telephone |
| Answering System | Yes |
| Speakerphone | Yes |
| Caller ID | Yes |
| Display | LCD |
| Battery Type | Ni-MH |
| Talk Time | Up to 17 hours |
| Number of Handsets | 1 |
| Call Waiting | Yes |
| Intercom | Yes |
| Power Source | AC adapter |
| Technology | DECT |
| Phonebook Capacity | 50 |
| Memory | 50 names and numbers |
| Range | Up to 300 meters outdoors |
