Why is my Panasonic Telephone battery life short?
If you fully charged the batteries in your Panasonic Telephone, but the operating time seems to be shorter, clean the battery ends and the charge contacts with a dry cloth, and charge again.
Why is caller information not displayed on my Panasonic Telephone?
If caller information is not displayed on your Panasonic Telephone, you may need to subscribe to a Caller ID service. Contact your service provider/telephone company for details. Also, if your unit is connected to any additional telephone equipment, remove it and plug the unit directly into the wall jack. If you use a DSL/ADSL service, connecting a DSL/ADSL filter between the base unit and the telephone line jack may help; contact your DSL/ADSL provider for details. Other telephone equipment may be interfering with this unit, so disconnect the other equipment and try again.
What to do if I cannot register a handset to a Panasonic Telephone base unit?
If you cannot register a handset to a Panasonic Telephone base unit, it may be because the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit. Another reason might be that you entered the wrong PIN. If you forget your PIN, contact your nearest Panasonic service centre. Also, place the handset and the base unit away from other electrical appliances.
Why can't I hear a dial tone on my Panasonic Telephone?
If you cannot hear a dial tone on your Panasonic Telephone, the base unit’s AC adaptor or telephone line cord may not be connected, so check the connections. If you are using a splitter, remove it and connect the unit directly to the wall jack. If the unit operates properly, check the splitter. You can also disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company.
Why is there noise on my Panasonic Telephone?
Noise or sound cutting in and out on your Panasonic Telephone can occur if you are using the handset or base unit in an area with high electrical interference. Place the base unit and use the handset away from sources of interference. Also, move closer to the base unit. If you use a DSL/ADSL service, connecting a DSL/ADSL filter between the base unit and the telephone line jack may help; contact your DSL/ADSL provider for details.
How to erase missed call from Panasonic Telephone display?
To erase the missed call notification from your Panasonic Telephone display, view all unviewed missed calls. Press the middle soft key, select “Caller List”, then press the down arrow to search from the most recent call, or press the up arrow to search from the oldest call.
Why is SMS message centre number logged in the caller list on Panasonic Telephone?
If the SMS message centre number is logged in the caller list and the message is not received on your Panasonic Telephone, someone tried to send you a message while SMS is turned off. Turn it on.
Why is “Q” not displayed after I read a message on Panasonic Telephone?
If “Q” is not displayed after you read a message on your Panasonic Telephone, when an error code (“FD”, “FE”, or “E0”) is displayed, “Q” will not be displayed even if you have read the message.
How to fix Panasonic Telephone batteries that won't hold charge?
If you have fully charged the batteries in your Panasonic Telephone, but the battery indicator still flashes, clean the charge contacts and charge again. It may also be time to replace the batteries.
What does 'E0' mean on my Panasonic Telephone?
The “E0” message on your Panasonic Telephone indicates that your phone number is permanently withheld or you have not subscribed to the appropriate service. Contact your service provider/telephone company.
General| Type | Cordless Phone |
|---|---|
| Number of Handsets | 1 |
| Caller ID | Yes |
| Talk Time | Up to 10 hours |
| Display | 1.4 inch LCD |
| Battery Type | Ni-MH |
| Frequency | 1.9 GHz |
| Technology | DECT |
| Handsets Supported | Up to 6 |
| Speakerphone | Yes |
| Answering System | No |
| Phonebook Capacity | 50 entries |
To Next Page
