SMS (Short Message Service)
32
Using SMS
SMS allows you to send and receive text
messages between other fixed-line and
mobile phones that support compatible
SMS networks and features.
Important:
L To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service.
– confirm that SMS is turned on.
– confirm that the correct message
centre numbers are stored.
Contact your service
provider/telephone company for
details and availability.
Note:
L A total of 47 messages (at 160
characters/message) can be saved.
Total number may be more than 47 if
length of messages is less than 160
characters/message.
L If the unit is connected to a PBX
system, you may not be able to use
SMS features.
Turning SMS on/off
1 K (middle soft key)
2 {V}/{^}: “SMS” i M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: “SMS On/Off” i M
5 {V}/{^}: Select the desired setting.
i M i {ih}
Storing SMS message
centre numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages. Contact your service
provider/telephone company for more
information.
L If you change the unit’s region
setting/reset the base unit, the stored
message centre numbers will be
deleted (page 35). In this case, store
the numbers again.
1 K (middle soft key)
2 {V}/{^}: “SMS” i M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: Select “Message
Centre1” or “Message
Centre2”. i M
5 Edit the number as necessary. i
M 2 times i {ih}
Note:
L For PBX users:
– You need to add the PBX line
access number and a dialling pause
to the beginning of the Message
Centre 1 number.
– If you only use the Message Centre
1 number for SMS, store the
Message Centre 1 number as is
(without adding a line access
number or dialling pause) to
Message Centre 2.
TG7301-7321FX(e).book Page 32 Wednesday, March 26, 2008 5:19 PM
To Next Page
Loading...
