To Next PageTo Next PageWhy can't I operate the answering system on my Panasonic KX-TG7301NZ?
Someone else might be using the unit, or a caller might be leaving a message, so wait for them to finish. The handset could also be too far from the base unit, so move closer.
How to erase y (Missed call) from Panasonic KX-TG7301NZ Cordless Telephone display?
View the missed calls using the following method: Press the middle soft key, then use the navigation keys to select “Caller List”, then press the navigation keys to search from the most recent or oldest call.
What to do if caller information is slow to display on Panasonic KX-TG7301NZ?
The unit may display the caller’s information at the 2nd ring or later. Also, try moving closer to the base unit.
What to do if my Panasonic KX-TG7301NZ does not work?
First, ensure the batteries are correctly installed and fully charged. Check all connections. If it still fails, unplug the base unit’s AC adaptor to reset the unit and turn off the handset, then reconnect and try again. The handset may not be registered to the base unit. In this case, register the handset.
Why has the time shifted on my Panasonic KX-TG7301NZ?
Incorrect time information from incoming Caller ID changes the time. Set the time adjustment to off.
Why can't I register a handset to a base unit on my Panasonic KX-TG7301NZ Cordless Telephone?
The maximum number of handsets (6) may already be registered to the base unit, so cancel unused handset registrations from the base unit. Place the handset and the base unit away from other electrical appliances.
What to do if I fully charged the batteries, but 3 still flashes on Panasonic KX-TG7301NZ Cordless Telephone?
Clean the charge contacts and charge again. If the issue persists, it may be time to replace the batteries.
What to do if my Panasonic KX-TG7301NZ does not record new messages?
First, ensure the answering system is turned on. If it is, the message memory might be full, so erase unnecessary messages. Also, check if the recording time is set to “Greeting Only” and change the setting if needed.
What to do if caller information is not displayed on my Panasonic KX-TG7301NZ?
If your unit is connected to any additional telephone equipment, remove it and plug the unit directly into the wall socket. Also, other telephone equipment such as a monitored Burglar Alarm or the modem in the SKY Digital decoder may be interfering with this unit. Disconnect the other equipment and try again.
Why is there noise and sound cutting in and out on my Panasonic Cordless Telephone?
This issue often occurs when the handset or base unit is in an area with high electrical interference, so move them away from such sources. Also, try moving closer to the base unit.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG7301NZ |
| Type | Cordless Telephone |
| Answering System | Yes |
| Speakerphone | Yes |
| Caller ID | Yes |
| Display | LCD |
| Battery Type | Ni-MH |
| Talk Time | Up to 17 hours |
| Number of Handsets | 1 |
| Call Waiting | Yes |
| Intercom | Yes |
| Power Source | AC adapter |
| Technology | DECT |
| Phonebook Capacity | 50 |
| Memory | 50 names and numbers |
| Range | Up to 300 meters outdoors |
