– 6 –
What should I do to display
caller information?
LYou must subscribe to a Caller ID service. Contact
your service provider/telephone company for
details.
LThe message “You must first subscribe
to Caller ID.” will be displayed until you
receive caller information after subscribing to a
Caller ID service.
What should I do when noise
is heard, sound cuts in and
out?
LYou are using the handset or base unit in an area
with high electrical interference. Place the base
unit and use the handset away from sources of
interference.
LMove closer to the base unit.
LIf you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
What should I do when the
operating time seems to be
shorter even after I fully
charged the batteries?
LClean the battery ends (S, T) and the charge
contacts with a dry cloth, and charge again.
What do I need to do to
erase y (Missed call) from
the display?
LThere are unviewed missed calls remaining. View
them using the following method.
1 K (middle soft key)
2 {V}/{^}: “Caller List” i M
3 Press {V} to search from the most recent call, or
press {^} to search from the oldest call.
Frequently asked questions
Question Cause/solution
TG7301_7321FX(e)_QG.fm Page 6 Wednesday, March 12, 2008 11:08 AM
To Next Page
Loading...
