Panasonic KX-TG7431 User Manual (English)

Other manuals for Panasonic KX-TG7431

Questions and Answers:

A
Anthony WaltersAug 21, 2025
What to do if my Panasonic Answering Machine does not record new messages?
- S
  Samantha HartmanAug 21, 2025
  There are several reasons why your Panasonic Answering Machine might not be recording new messages: * The answering system may be turned off. Turn it on. * The message memory could be full. Erase unnecessary messages. * The recording time might be set to 'Greeting only'. Change the setting. * If you subscribe to a voice mail service, your service provider/telephone company records messages, not your telephone. Change the unit’s number of rings setting.
H
heatherwilliamsAug 22, 2025
Why is my Panasonic Answering Machine not working?
- M
  Mr. Casey WallerAug 22, 2025
  If your Panasonic Answering Machine is not working, consider the following: * Ensure the batteries are correctly installed. * Fully charge the batteries. * Check all connections. * Reset the unit by unplugging the base unit’s AC adaptor, then reconnecting it. * Register the handset to the base unit if it hasn't been already.
D
Danielle KellerAug 25, 2025
Why Caller ID is not displayed on Panasonic Answering Machine?
- C
  Cassandra BrockAug 25, 2025
  If caller information is not displayed on your Panasonic Answering Machine, it may be due to the following reasons: * You need to subscribe to Caller ID service. Contact your service provider/telephone company. * If additional telephone equipment is connected, plug the unit directly into the wall jack. * If you use DSL/ADSL, connect a DSL/ADSL filter between the base unit and the telephone line jack. * The name display service may not be available in your area. Contact your service provider/ telephone company. * Other telephone equipment may be interfering with the unit. Disconnect the other equipment.
W
wdonovanAug 27, 2025
Panasonic Answering Machine does not ring, what to do?
- T
  Tracey OlsonAug 27, 2025
  If the handset and/or base unit of your Panasonic Answering Machine are not ringing: * The ringer volume may be turned off. Adjust the ringer volume. * Silent mode may be turned on. Turn it off.
E
Eugene ClarkAug 28, 2025
Why I cannot make a call on Panasonic Answering Machine?
- J
  Jessica MorganAug 28, 2025
  If you cannot make a call on your Panasonic Answering Machine: * The dialing mode may be set incorrectly. Change the setting. * The handset may be too far from the base unit. Move closer and try again.
K
Kathleen RichardAug 29, 2025
Why I cannot hear dial tone on Panasonic Answering Machine?
- B
  brandyvillegasAug 29, 2025
  If you cannot hear a dial tone on your Panasonic Answering Machine, check these items: * Make sure the base unit’s AC adaptor and telephone line cord are properly connected. * If you're using a splitter, remove it and connect the unit directly to the wall jack to see if the splitter is the problem. * Disconnect the base unit and connect the telephone line to a working telephone. If the working telephone doesn't operate properly, contact your service provider/telephone company.
A
Anna BurtonAug 31, 2025
How to fix noise on Panasonic Answering Machine?
- C
  Christina ComptonAug 31, 2025
  If you are experiencing noise or sound cutting in and out on your Panasonic Answering Machine, consider the following: * Relocate the base unit and handset away from sources of electrical interference. * Move closer to the base unit. * If you have DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack.
K
Katherine NguyenSep 2, 2025
What does underscore mean on Panasonic Answering Machine?
- G
  Gregory WilliamsSep 2, 2025
  If '_' is displayed on your Panasonic Answering Machine, it could be due to: * The handset being too far from the base unit. Try moving closer. * The base unit’s AC adaptor not being properly connected. Reconnect it. * Electrical interference in the area. Re-position the base unit and use the handset away from sources of interference. * The handset not being registered to the base unit. Register it.
D
dianejonesSep 4, 2025
What does flashing symbol mean on Panasonic Answering Machine?
- A
  Amanda JonesSep 4, 2025
  If the handset of your Panasonic Answering Machine beeps and/or the ) symbol flashes, it indicates that the battery charge is low. Fully charge the batteries.
J
Jennifer MunozSep 5, 2025
Why is battery still flashing on Panasonic Answering Machine?
- X
  xguzmanSep 5, 2025
  If you have fully charged the batteries of your Panasonic Answering Machine, but the ) symbol still flashes or 0 is displayed: * Clean the charge contacts and charge again. * It may be time to replace the batteries.

Panasonic KX-TG7431 Specifications

General

Type	Cordless Telephone
Number of Handsets	1
Frequency	1.9 GHz
Caller ID	Yes
Call Waiting	Yes
Speakerphone	Yes
Answering Machine	Yes
Digital Answering System Recording Time	Up to 18 minutes
Display Type	LCD
Display Size	1.8 inches
Backlit Keypad	Yes
Ringer Volume Control	Yes
Headset Jack	Yes
Talk Time	Up to 10 hours
Intercom	Yes
Power Source	AC Adapter
Expandable Handsets	Yes, up to 6 handsets
Phonebook Capacity	50 entries
Battery Type	Ni-MH
Weight	0.4 kg