Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
*3
Set dial mode
*1
1: Pulse
2: <Tone>
#120 17
Set flash time
*1, *15
0: 900 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
#121 24
Set line mode
*1, *16
1: A 2: <B> #122 –
C. WTG options
*1
(Call Waiting Deluxe
options)
1: On
0: <Off>
#215 45
Privacy mode
*1
– 1: On
0: <Off>
#194 25,
29
Registration Register handset
– #130 43
Deregistration
*2
– #131 43
Change language Display
1: <English>
2: Français
#110 17
Voice prompt
*1
1: <English>
2: Français
#112 17
Main menu: “Customer support”
Operation Code
Displaying customer support Web address. #680 –
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 20).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*8 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
39
Programming
To Next Page
Loading...
