Panasonic KX-TG9322T - Battery Installation and Charging

Getting Started
10
For assistance, please visit http://www.panasonic.com/help
To connect to 2 single-line telephone
jacks
Example: DSL/ADSL line is line 2
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
“Charge completed” is displayed.
“GREEN” plug
“Transparent” plug
DSL/ADSL filter*
“Click”
“Click”
To single-line telephone
jacks (RJ11C)
4-wire cord
2-wire cord
Line 1
Line 2
Rechargeable Ni-MH ONLY
Confirm “Charging” is displayed.
TG9321(e).book Page 10 Friday, May 28, 2010 4:34 PM