Useful Information
37
For assistance, please visit http://www.panasonic.com/help
Wall mounting
Note:
L Make sure that the wall is strong
enough to support the weight of the
unit.
Base unit
1
Lead the AC adaptor cord and
telephone line cord through the hole
in the wall mounting adaptor in the
direction of the arrow.
2 Tuck the telephone line cord inside
the wall mounting adaptor (A).
Connect the AC adaptor cord and
telephone line cord (B).
3 Insert the hooks on the wall
mounting adaptor into holes 1 and
2 on the base unit.
4 Adjust the adaptor to hold the base
unit, then push it in the direction of
the arrow until it clicks into place.
Hook
AC adaptor cord
A
B
2
1
2
1
TG9321(e).book Page 37 Friday, May 28, 2010 4:34 PM
To Next Page
Loading...
