Panasonic KX-TG9322T - Belt Clip

Useful Information
38
For assistance, please visit http://www.panasonic.com/help
5 Mount the unit on a wall then slide
down to secure in place.
To remove the wall mounting adaptor
While pushing down the release levers
(A), remove the adaptor (B).
Charger
1
Drive the screws (not supplied) into
the wall.
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
Belt clip
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
(120 V AC,
60 Hz)
83 mm
(3
1
/4 inches)
102 mm
(4 inches)
AC adaptor cord
2
2
1
1
A
A
B
■ To attach ■ To remove
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG9321(e).book Page 38 Friday, May 28, 2010 4:34 PM