Preparation
13
For assistance, please visit http://www.panasonic.com/help
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Battery installation and
replacement
Important:
L Use the supplied rechargeable
batteries (Part No. HHR-65AAABU).
L When installing the batteries:
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Ensure correct polarities (S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use
Alkaline/Manganese/Ni-Cd
batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 6, 8.
1 Press the notch on the handset
cover firmly, and slide it in the
direction of the arrow.
2 Insert the batteries negative (T)
end first. Close the handset cover.
Note:
L When replacing batteries, remove the
old batteries.
To single-line
telephone
jack (RJ11C)
DSL/ADSL filter
Rechargeable Ni-MH ONLY
TG93XX_OI.book Page 13 Thursday, December 27, 2007 3:38 PM
To Next Page
Loading...
