– 5 –
Quick troubleshooting
Place the handset on the base unit, then
check if “Charging” is displayed.
“Charging” is not displayed.
“Charging” is
displayed.
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
Unplug the AC adaptor of the base unit and remove the
batteries from the handset, then plug in the AC adaptor and
insert the batteries into the handset again. Try to re-register
the handset (page 7).
Lift the handset, then try again.
If handset still shows the same
message, try to re-register the
handset (page 7).
“Charging” is still not
displayed.
Re-registration failed.
Re-registration failed.
“Charging” is
displayed, now.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to base. Reconnect AC adaptor.”
1 Handset shows:
TG934x_QG(e).fm Page 5 Wednesday, December 5, 2007 10:12 AM
To Next Page
Loading...
