– 6 –
Quick troubleshooting
Lift up the handset from the charger.
Press {C} at the handset, then check if the display shows
“Talk”.
Check if the
telephone cord is
properly connected
to both the base
unit and telephone
line jack on the
wall.
Try to connect your
telephone into a
different line.
Press {s} , then check if the dial tone
is heard from the speaker on the back.
No dial tone
Dial tone is heard.
2 No dial tone is heard from handset.
Try remedy for 1
on previous page.
See if “Check tel line 1” or “Check tel line 2” is shown on the handset display.
Your telephone may need
service when only back
speaker provides a dial
tone.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to base.
Reconnect AC
adaptor.”
is displayed.
“Talk” is displayed.
Displayed Not displayed
Still displayed
Still displayed
{C}
{s}
1
Talk
Line1
LINE
MUTE
2
MENU
2
L1
dB
=Volume
00-00-00
1
No link to base.
Reconnect AC
adaptor.
1
TG9391_QG(e).fm Page 6 Thursday, July 3, 2008 9:25 AM
To Next Page
Loading...
