– 7 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to
the base unit, register the handset.
{MENU} i {#}{1}{3}{0}
Press and hold {LOCATOR} for 5 seconds until the
registration tone sounds.
LThe next step should be completed within 90
seconds.
Press {OK}, then wait until a long beep sounds.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
LINE1 LINE2MENU
{MENU}
Base unit
{LOCATOR}
Handset
BACK OK
Press LOCATOR
on base for 5sec
Then press OK
{OK}
TG9391_QG(e).fm Page 7 Thursday, July 3, 2008 9:25 AM
To Next Page
Loading...
