R T
o hang up only one line, press ML1N or
ML2N for the party with which you want to
continue talking.
R To put both lines on hold, press MMENUN.
a MbN: “Hold” a MSELECTN
– To resume both lines, press MCONFN.
– To talk with only one caller, press ML1N or
ML2N for the party with which you want to
continue talking.
Conference call with an outside call and an
i
ntercom call
While you are talking with an outside caller, one
more extension can join the conversation and
establish a conference call.
1 During an outside call, press MMENUN to put
the call on hold.
2 MbN: “Intercom” a MSELECTN
3 MbN: Select the desired unit. a MSELECTN
4 When the paged party answers, press
MMENUN. a MbN: “Conference” a
MSELECTN
R If the paged party does not answer, press
MBACKN to return to the outside call.
R The 2 calls are combined.
R To leave the conference, press MOFFN. The
other 2 parties can continue the
conversation.
Note:
R The outside call can be put on hold by pressing
MMENUN. a MbN: “Hold” a MSELECTN
Only the person who placed the call on hold can
resume the full conference by pressing
MMENUN. a MbN: “Conference” a
MSELECTN
Transferring a cellular call between
t
he handset and a cellular phone
Transferring a cellular call from the handset to
a
cellular phone
1 Press MMENUN during a cellular call.
2 MbN: “Transfer to cell” a MSELECTN
R The cellular call is transferred to the cellular
phone.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be ready
to talk before transferring. For example, if your
cellular phone has a top cover, open it
b
eforehand.
R You can also transferring a cellular call as
follows:
Press and hold MCELLN.
Transferring a cellular call from a cellular
p
hone to the handset
During a conversation using a cellular phone, the
call cannot be transferred to the handset by the
cellular phone. Perform the following with the
handset.
1 During a conversation using a cellular phone,
press MCELLN.
R The call is transferred to the handset when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 21).
2 MbN: Select the corresponding cellular phone.
a MSELECTN
R The call is transferred to the handset.
Answering a 2nd call
I
f you receive a call while talking on the phone, the
interrupt tone sounds (page 46) and the 2nd
caller’s information is displayed if you subscribe to
Caller ID service (page 54).
Answering a 2nd call during a landline call
E
xample: If you are using line 1:
1 Press MMENUN during a landline call.
2 MbN: “Hold” a MSELECTN
3 To answer the 2nd call:
Press the line button (ML2N or MCELLN) which
the 2nd call is being received.
4 To hang up the 2nd call and return to the 1st
call (landline call), press MOFFN, then press
the corresponding line button (ML1N).
Answering a 2nd call during a cellular call
E
xample: If you are using cellular line 1:
1 Press MMENUN during a cellular call.
2 MbN: “Hold” a MSELECTN
3 To answer the 2nd call:
Press the line button (ML1N or ML2N) which the
2nd call is being received.
4 To hang up the 2nd call and return to the 1st
call (cellular call), press MOFFN, then press
MCELLN.
26
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
To Next Page
Loading...
