Menu list
T
o access the features, there are 2 methods.
Handset / Base unit
n S
crolling through the display menus
1 MMENUN
2 Press MCN or MDN to select the desired main menu. a MSELECTN
3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4 Press MCN or MDN to select the desired setting. a MSAVEN
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#101.
2 Select the desired setting. a MSAVEN
Note:
R The unit column shows the unit(s) that can be used to program the item.
: Only the handset can program the item.
: Only the base unit can program the item.
/ : Both the handset and base unit can program the item.
R T
o exit the operation, press MOFFN on the handset or MEXITN on the base unit.
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R D
isplay menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
M
ain menu:
“P
honebook”
Operation Code Unit
Viewing the phonebook entry. #280
/
38
Main menu: “C
aller list”
Operation Code Unit
Viewing the caller list. #213
/
54
Main menu:
H
andset:
“A
nswering device” a MbN: “Line1” or “Line2”
Base unit:
“A
nswer device” a MbN: “Line1” or “Line2”
Sub-menu 1 Sub-menu 2 Settings Code Unit
Play new message
– –
#3231
*
1
63
#3232
*
2
Play all message
– –
#3241
*
1
63
#3242
*
2
For assistance, please visit http://shop.panasonic.com/support
43
Programming
To Next Page
Loading...
