5
Battery installation/Battery charging
(page 2:
2
)
Important:
•
Use the supplied rechargeable batteries. For replacement, we recommend
using the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
•
Wipe the battery ends (
S
,
T
) with a dry cloth.
•
Avoid touching the battery ends (
S
,
T
) or the unit contacts.
•
Confirm correct polarities (
S
,
T
).
•
USE ONLY Ni-MH batteries AAA (R03) size.
•
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
•
The handset display may show
“
Please wait for 1 minute.
”
when the
handset is placed on the charger if it is not registered to the base unit.
•
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
S
,
T
) and the charge contacts with a dry cloth and
charge again.
Display language
16 display languages are available.
1 8
/
1
(middle soft key)
(11)
2
{
r
}
: Select your desired language.
s
M
s
{i
c
}
When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{
r
}
: Select your desired language.
s
M
s
{i
c
}
You can select “ ”, “ ”, “ ”, “ ”,
“ ”, “ ”, “ ”, “ ”, “ ”,
“ ”, “ ”, “ ”, “ ”, “ ”,
“ ”, or “ ”.
TGA661FX(fx).book Page 5 Thursday, February 24, 2011 9:03 AM
To Next Page
Loading...
