Panasonic KX-TGA710B - Getting Started; Setting Up the Unit

Setting up
Connections
Connect the AC adaptor to the unit by pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord for your external phone (not
supplied) to the unit ("LINE IN" port), then to the single-line
telephone jack (RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL
service.
Connect the supplied telephone line cord to the unit ("PHONE" port),
then connect to your external phone.
Note:
R Use only the supplied Panasonic AC adaptor PNLV226.
LINE IN PHONE
To external phoneTo single-line telephone jack (RJ11C)
3
4
5
41 6
6
2
1
8
For a
ssistance, please visit http://shop.panasonic.com/support
Getting Started
PNQX8877ZA_0115_ver101.pdf 8 2019/01/15 17:09:23