4 For assistance, please visit http://www.panasonic.com/help
Attention:
Register the handset to the KX-TG8231/KX-TG8232
base unit
1
Lift the handset and press {OFF}. Place the handset on the base unit.
LContinue the operation even when the handset display shows
“Registering”.
2 Press and hold {x} (LOCATOR) on the base unit for about 5
seconds, until the registration tone sounds.
LIf all registered handsets start ringing, press {x} (LOCATOR) to
stop, then repeat this step.
3 With the handset still on the base unit, wait until a confirmation tone
sounds and w stops flashing.
Note:
LIf an error tone sounds, or if w is still flashing, register the handset
according to the base unit’s operating instructions.
Changing the display language
1
{MENU} (center of joystick)
2 Select M by pushing the joystick in any direction. i {SELECT}
3 Push the joystick up or down to select “Change language”. i
{SELECT}
4 Push the joystick up or down to select the desired language.
5 Press down the center of the joystick to save.
6 {OFF}
A nickel metal hydride battery that is
recyclable powers the product you
have purchased.
Please call 1-800-8-BATTERY (1-
800-822-8837) for information on how
to recycle this battery.
TGA820(e).fm Page 4 Thursday, June 28, 2007 5:07 PM
To Next Page
Loading...
