EasyManua.ls Logo

Panasonic KX-TGB210NZ - User Manual

Panasonic KX-TGB210NZ
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
This unit is compatible with Caller ID. You must subscribe to the appropriate service
offered by your service provider/telephone company.
Before initial use, see “Getting Started”
on page 9.
Please access our online customer survey:
http://panasonic.net/pcc/tel/q
Operating Instructions
Model No. KX-TGB210NZ
KX-TGB212NZ
KX-TGB213NZ
Digital Cordless Phone
Model shown is KX-TGB210.
TGB21xNZ(en).book Page 1 Monday, March 24, 2014 2:21 PM

Table of Contents

Questions and Answers

  • E
    Elizabeth StephensAug 18, 2025
    Why does my Panasonic Cordless Telephone have noise and sound cuts?
    • C
      Casey HobbsAug 19, 2025
      If you hear noise or the sound cuts in and out while using your Panasonic Cordless Telephone, it could be due to electrical interference. Try repositioning the base unit and using the handset away from sources of interference. If you use a DSL/ADSL service, contact your provider to install a DSL/ADSL Splitter. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset. Reconnect the adaptor, turn on the handset and try again. You may also need to move closer to the base unit.
  • K
    Kelly JonesAug 21, 2025
    Why my Panasonic Cordless Telephone does not work?
    • L
      Lori MitchellAug 21, 2025
      If your Panasonic Cordless Telephone is not working, make sure the batteries are installed correctly and fully charged. Check the connections. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset. Reconnect the adaptor, turn on the handset and try again. Also, remove the batteries from the handset and install them again. The handset may not be registered to the base unit; in that case, register the handset.
  • J
    julie62Aug 23, 2025
    Why I cannot hear a dial tone on my Panasonic KX-TGB210NZ Cordless Telephone?
    • S
      Scott HartmanAug 23, 2025
      If you cannot hear a dial tone on your Panasonic Cordless Telephone, ensure you are using the supplied telephone line cord, as your old cord may have a different wiring configuration. Check that the base unit’s AC adaptor or telephone line cord is connected properly. Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company.
  • K
    kimberlygallagherAug 26, 2025
    What to do if Panasonic KX-TGB210NZ handset does not turn on?
    • A
      Amanda MartinezAug 26, 2025
      If your Panasonic Cordless Telephone handset doesn't turn on even after installing charged batteries, place the handset on the base unit or charger to turn it on.
  • H
    Heather KingAug 28, 2025
    What does it mean when w is flashing on my Panasonic Cordless Telephone?
    • J
      Jasmine PetersAug 28, 2025
      If the w is flashing on your Panasonic Cordless Telephone, the handset is too far from the base unit. Move closer. Also, ensure the base unit’s AC adaptor is properly connected. If the issue persists, the handset may not be registered to the base unit; register it.
  • S
    Samantha AdamsAug 30, 2025
    Why caller ID is not working on my Panasonic KX-TGB210NZ?
    • G
      Gregory VincentAug 30, 2025
      If caller information is not displayed on your Panasonic Cordless Telephone, you must subscribe to a Caller ID service. If your unit is connected to additional telephone equipment, remove it and plug the unit directly into the wall socket. If you use a DSL/ADSL service, contact your provider to have a DSL/ADSL Splitter installed. Other telephone equipment such as a monitored Burglar Alarm or the modem in the SKY Digital decoder may be interfering with this unit. Disconnect the other equipment and try again.
  • E
    Emily CarterSep 1, 2025
    How to fix blank display on Panasonic KX-TGB210NZ Cordless Telephone?
    • N
      nbowenSep 2, 2025
      If the Panasonic Cordless Telephone handset display is blank, turn the power on.
  • K
    Kimberly BennettSep 4, 2025
    Why does my Panasonic Cordless Telephone beep and/or display 8?
    • J
      jon19Sep 4, 2025
      If your Panasonic Cordless Telephone handset beeps and/or 8 displays, fully charge the batteries.
  • W
    William RitterSep 6, 2025
    Why Panasonic KX-TGB210NZ battery level does not increase?
    • J
      Jennifer HillSep 6, 2025
      If you fully charged the batteries of your Panasonic Cordless Telephone, but the battery level does not increase or the operating time seems shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. It may also be time to replace the batteries.
  • H
    Heather BradfordSep 8, 2025
    Why can't I make calls on my Panasonic KX-TGB210NZ Cordless Telephone?
    • M
      Mary JonesSep 8, 2025
      If you cannot make a call on your Panasonic Cordless Telephone, ensure the handset is not too far from the base unit. If another unit is in use, wait and try again later. If you are using a BT double adaptor, remove it and connect the unit directly to the phone wall socket. If the unit operates properly, check or replace the adaptor. Note that the unit is not designed to be used with rotary/pulse dialling services.

Summary

Introduction

Model Composition

Details base unit and handset quantities for different models.

Accessory Information

Lists supplied accessories with part numbers and quantities.

Additional;Replacement Accessories

Information on obtaining additional or replacement accessories.

Important Information

Safety Precautions

Safety warnings for power, installation, operation, and medical considerations.

Battery and General Notices

Battery handling, safety, general notices, and power failure operations.

Performance, Environment, and Care

Tips for best performance, environmental factors, routine care, and disposal.

Disposal and Specifications

Disposal symbols for non-EU countries and technical specifications.

Getting Started

Setting Up and Battery Charging

Instructions for unit setup, connections, and battery charging.

Setup Notes and Battery Level

Notes on setup, power failures, and battery performance indicators.

Controls and Display Overview

Identification of handset/base unit controls and explanation of display items.

Powering On;Off and Initial Settings

Procedures for powering the unit and initial settings like language and date/time.

Making and Answering Calls

Making Calls, Redialing, and Volume

Steps for dialing, redialing, and adjusting receiver volume.

Answering Calls and Auto Talk

Instructions for answering calls and using the auto-talk feature.

Ringer Volume, Mute, and Call Features

Adjusting ringer, using mute, recall/flash, and call waiting.

Call Share and Pause Function

Using call share and pause functions for specific needs.

Phonebook Management

Phonebook Overview and Adding Entries

Using the phonebook and step-by-step guide to add new entries.

Editing and Erasing Phonebook Entries

Procedures for editing or erasing phonebook entries.

Chain Dial Feature

Using the phonebook to dial numbers during an active call.

Programming Features

Programmable Settings Menu

How to customize unit settings via the display menus.

Ringer, Time, and Alarm Settings

Settings for ringer, time, and alarm functions.

Setup, Recall;Flash, Privacy, and Intercom

Various setup options including language, recall, privacy, and intercom.

Special Programming: Alarm Function

Detailed guide for setting the alarm function.

Caller ID Service

Using Caller ID and Toll Services

Requirements and benefits of using Caller ID and toll services.

Caller ID Features and Call Logging

How caller information is displayed, logged, and missed calls are indicated.

Viewing Caller List and Calling Back

Steps to view caller list entries and make a call back.

Editing, Erasing, and Storing Caller Information

Procedures to edit, erase, or save caller information.

Voice Mail Service

Voice Mail Service Overview

Information about receiving Call Minder or Message Mailbox messages.

Intercom and Locator Functions

Intercom Calls

How to make and answer intercom calls between handsets.

Handset Locator and Call Transfer;Conference

Locating handsets, transferring calls, and setting up conference calls.

Useful Information

Character Entry Methods

Explanation of how to enter characters using dial keys and entry modes.

Extended Character Tables

Tables for extended character entry modes (AÃÄ, SŚŠ, АБВ).

Troubleshooting Common Issues

Solutions for error messages and general operational problems.

Advanced Troubleshooting and Handling

Solutions for settings, battery, call, and intercom issues.

Caller ID and Liquid Damage Troubleshooting

Troubleshooting for Caller ID, time shifts, and liquid damage.

Handset Registration and PIN Change

Procedures for registering/deregistering handsets and changing the base unit PIN.

Warranty

Product Warranty Information

Details of the Panasonic product warranty terms and conditions.

Index

Index

Alphabetical listing of topics and their corresponding page numbers.

Panasonic KX-TGB210NZ Specifications

General IconGeneral
TypeCordless Telephone
Number of Handsets1
Frequency1.9 GHz
DECT SecurityYes
Number of Channels120
RangeUp to 300m outdoors, 50m indoors
Talk TimeUp to 10 hours
DisplayLCD
Backlit DisplayYes
Phonebook Entries50
Caller IDYes
Call WaitingYes
SpeakerphoneYes
Answering MachineNo
Backlit KeypadYes
Weight (Handset)120 g
ColorBlack
Battery TypeNi-MH
Phonebook Capacity50
Ringtones10
IntercomYes
Power AdapterYes

Related product manuals