Programming
17
Programmable settings
You can customise the unit by programming the following features using the handset.
Programming by scrolling through the display menus
1
{j/OK}
2 Press {V} or {^} to select the desired main menu. s {j/OK}
3 Press {V} or {^} to select the desired item in sub-menu 1. s {j/OK}
L In some cases, you may need to select from sub-menu 2. s {j/OK}
4 Press {V} or {^} to select the desired setting. s {j/OK}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {m}.
Note:
L In the following table, < > indicates the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Ringer Setup Volume
*1
<Volume 5>
–14
Ringtone
*2
<Ringtone 1>
––
Set Time Date & Time
*3
–12
Alarm Alarm Mode
<Off>
19
Repeat Times
<Off>
Repeat Cycle
<3 Minutes>
Ringtone
<Ringtone 1>
Volume
<Volume 5>
Time Adjust
*3,
*4
<Caller ID>
––
Phonebook Show List –15
New Entry –15
Erase All –15
Memory –15
Caller List ––20
TGB21xNZ(en).book Page 17 Monday, March 24, 2014 2:21 PM
To Next Page
Loading...
