EasyManua.ls Logo

Panasonic KX-TGC263E

Panasonic KX-TGC263E
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caller ID
Problem Cause/solution
Caller information is not
displayed.
R You must subscribe to a Caller ID service. Contact your phone
service provider for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is slow
to display.
R Depending on your phone service provider, the unit may
display the caller’s information at the 2nd ring or later. Set the
first ring to Off (page 25).
R Move closer to the base unit.
Time on the unit has
shifted.
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to Manual (off) (page 26).
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R Edit the phonebook entry name to fit in 1 line of text (page 22).
Answering system
Problem Cause/solution
The unit does not record
new messages.
R The answering system is turned off. Turn it on (page 32).
R The message memory is full. Erase unwanted messages
(page 33).
R The recording time is set to Greeting Only. Change the
setting (page 35).
R Your phone service provider’s voicemail service may be
answering your calls before the unit’s answering system can
answer your calls. Change the unit’s number of rings setting
(page 35) to a lower value, or contact your phone service
provider.
I cannot operate the
answering system
remotely.
R The remote access code is not set. Set the remote access
code (page 34).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 34).
R The answering system is turned off. Turn it on (page 35).
42
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Useful Information

Related product manuals