To Next PageTo Next PageWhy is there noise and cutting out sound on my Panasonic KX-TGE633 Cordless Telephone?
The noise and cutting out of sound may be due to electrical interference in the area. Try re-positioning the base unit and move the handset away from sources of interference. Also, move closer to the base unit. If you use a DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack.
What does it mean when the indicator on my Panasonic Cordless Telephone handset flashes slowly?
If the indicator on your Panasonic Cordless Telephone handset flashes slowly, listen to the new messages or listen to the new voicemail messages.
Why is my Panasonic KX-TGE633 base unit beeping?
If the base unit is beeping, listen to the new messages.
Why does my Panasonic KX-TGE633 Cordless Telephone base unit beep?
If the base unit of your Panasonic Cordless Telephone is beeping, listen to the new messages.
Why doesn't my Panasonic KX-TGE633 Cordless Telephone emit the specified number of rings?
The number of rings may decrease by 1 from the specified number of rings if the first ring is turned off or automated call block is set to “Block”.
Why is there an error sound when I press some keys on my Panasonic Cordless Telephone base unit?
If you hear an error sound when pressing keys on the base unit of your Panasonic Cordless Telephone, automated call block is being screened. Try again later.
What to do if liquid entered my Panasonic KX-TGE633 Cordless Telephone handset/base unit?
Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
Why does my Panasonic KX-TGE633 Cordless Telephone handset not ring?
If your Panasonic Cordless Telephone handset isn't ringing, the ringer volume may be turned off; adjust it. Silent mode may be turned on; turn it off. Also, the ringer volume might be turned off by pressing and holding 0; turn it on again.
Why does my Panasonic Cordless Telephone still flash or have short operating time after fully charging the batteries?
If your Panasonic Cordless Telephone still flashes, displays , or has a shorter operating time after a full charge, clean the battery ends and the charge contacts with a dry cloth and charge again. If the problem persists, it may be time to replace the batteries.
What to do if my Panasonic Cordless Telephone does not work?
If your Panasonic Cordless Telephone isn't working, ensure the batteries are installed correctly. Fully charge the batteries. Check the connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it. Also, the handset may not be registered to the base unit; register the handset.
General| Display diagonal | 1.88 \ |
|---|---|
| Backlight display | Yes |
| Display resolution | 103 x 65 pixels |
| Display number of lines | 1 lines |
| Display number of colors | Monochrome |
| Battery type | AAA |
| Standby time | 120 h |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Battery recharge time | 7 h |
| Number of batteries supported | 2 |
| Speakerphone | No |
| Phonebook capacity | 100 entries |
| Number of handsets included | 1 |
| Frequency range | 1.92 GHz - 1.93 GHz |
| Mounting type | Desk |
| Product color | Black |
| Type | DECT telephone |
| Ringer type | Polyphonic |
| Handset type | Wireless handset |
| Number of ringer volume levels | 6 |
Weight and Dimensions| Handset weight | 150 g |
|---|---|
| Base dimensions | 138 x 59 x 91 mm |
| Handset dimensions (WxDxH) | 54 x 171 x 32 mm |
Essential safety precautions to prevent injury and property loss during product use.
Lists basic safety precautions to reduce the risk of fire, electric shock, and injury.
Guides through connecting the base unit, charger, and installing the handset batteries.
Details battery charging duration, level indicators, and maintenance for battery contacts.
Guides on initiating calls using handset/base unit, redialing, and adjusting volume.
Details features like Hold, Mute, Ringer Off, Flash, and Call Waiting.
Covers automatic intercom answering and how the unit operates during a power failure.
Provides instructions for making and answering calls when the unit is in power backup mode.
Covers blocking single numbers, ranges, unknown CID, and adding numbers from the caller list.
Explains how to access features via menus or direct command codes, and provides a menu tree.
Covers talking Caller ID, low battery alerts, key detectors, and call blocking configurations.
Explains Caller ID requirements, talking Caller ID, phonebook name announcements, and missed call indicators.
Covers turning the system on/off, greeting messages, and recording custom greetings.
Guides on listening to messages via handset/base unit and using playback controls.
Explains remote access codes, using the system remotely, voice guidance, and turning the system on remotely.
Details call screening, ring counts, recording time, greeting-only mode, and handset message indicators.
Lists error messages and provides solutions for common handset, unit operation, and dial tone issues.
