Making calls
Using the handset
1 L
ift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 M
N
3 W
hen you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1 Dial the phone number and press MZN.
2 When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M N.
Making a call using the redial list
T
he last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 MEN REDIAL
2 MbN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1 MEN REDIAL
2 MbN: Select the desired phone number.
a MERASEN
3 MbN: “Yes” a MSELECTN a MOFFN
Using the base unit
1 D
ial the phone number.
R To correct a digit, press MCLEARN.
2 MZN
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press MZN.
Note:
R W
hile on a call, you can switch from the
base unit to the handset:
– Press M
N
on the handset, then press
MZN on the base unit with the call
sharing mode on (page 32).
– If the handset is on the base unit, simply
lift it.
Making a call using the redial list
T
he last 10 phone numbers dialed are stored
in the redial list (each 48 digits max.).
1 MREDIALN
2 MbN: Select the desired phone number.
3 MZN
Erasing a number in the redial list
1 MR
EDIALN
2 MbN: Select the desired phone number.
a MERASEN
3 MbN: “Yes” a MSELECTN
4 MEXITN
Adjusting the receiver or speaker
v
olume
Handset / Base unit
P
ress MDN or MCN repeatedly while talking.
Pause (for PBX/long distance
s
ervice users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 26).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
Handset
1 9 a MDN (Pause)
2 Dial the phone number. a M N
For assistance, please visit www.panasonic.com/support
15
Making/Answering Calls
To Next Page
Loading...
