2 MbN: Select the entry to be blocked.
R To edit the number: Press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
3 MCALL BLOCKN
4 MbN: “Yes” a MSELECTN
5 Edit the phone number if necessary (24
digits max.). a MSAVEN a MEXITN
Adding call blocked numbers
manually
Handset
1 MCALL BLOCKN
2 MbN: “Block a single number” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the phone number (24 digits max.).
a MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 MbN: “Block a single #” a
MSELECTN
3 MADDN
4 Enter the phone number (24 digits max.).
a MSAVEN a MEXITN
Storing a range of number
Handset
1 MCALL BLOCKN
2 MbN: “Block range of numbers” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the desired number (2-8 digits). a
MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 MbN: “Block range of #” a
MSELECTN
3 MADDN
4 Enter the desired number (2-8 digits). a
MSAVEN a MEXITN
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
Handset
1 MCALL BLOCKN
2 MbN: “Block unknown CID” a
MSELECTN
3 MbN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 MbN: “Block unknown”a MSELECTN
3 MbN: Select the desired setting. a
MSAVEN a MEXITN
Turning the first ring on/off
You can choose whether the first ring sounds
when a call is received.
“Yes” (default): The first ring for all calls will
be heard, including calls from blocked phone
numbers.
“No”: The first ring is muted for all calls. If this
setting is selected, the unit will never ring for
calls from blocked phone numbers.
Handset
1 MCALL BLOCKN
2 MbN: “One ring for blocked call”
a MSELECTN
3 MbN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 MbN: “Ring once” a MSELECTN
3 MbN: Select the desired setting. a
MSAVEN a MEXITN
For assistance, please visit http://shop.panasonic.com/support
23
Call Block
To Next Page
Loading...
