EasyManua.ls Logo

Panasonic KX-TGF540 Series - To Monitor from Outside; Turning Off the Baby Monitor; Editing an Outside Monitoring Number; Erasing an Outside Monitoring Number

Panasonic KX-TGF540 Series
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Handset
1 MMENUN#268
2 MbN: On a MSELECTN
3 MbN: Select the desired unit’s number to
monitor with. a MSAVEN
R Baby monitor will be displayed.
R The registered unit’s name/number is
displayed.
Note:
R When this feature is on, another handset or
the base unit can hear the monitored
handset by making an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
Handset
n From the phonebook:
1 MMENUN#268
2 MbN: On a MSELECTN
3 MbN: Select Outgoing call to
monitor from outside. a MADDN
4 MbN: Phonebook a MSELECTN
5 MbN: Select the phonebook entry. a
MSAVEN
R Baby monitor will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1 MMENUN#268
2 MbN: On a MSELECTN
3 MbN: Select Outgoing call to
monitor from outside. a MADDN
4 MbN: Manual a MSELECTN
5 Enter the desired name. a MOKN
6 Enter the desired number. a MOKN
a MSELECTN
R Baby monitor will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to On.
Handset
1 Press MMENUN on the handset being
monitored.
2 MbN: On/Off a MSELECTN
3 MbN: Off a MSELECTN a MOFFN
Editing an outside monitoring number
Handset
1 Press MMENUN on the handset being
monitored.
2 MbN: On/Off a MSELECTN
3 MbN: On a MSELECTN
4 MbN: Select the outside line.
5 MMENUN a MbN: Edit a MSELECTN
6 Edit the name if necessary. a MOKN
7 Edit the phone number if necessary. a
MOKN a MSELECTN
Erasing an outside monitoring
number
Handset
1 Press MMENUN on the handset being
monitored.
2 MbN: On/Off a MSELECTN
3 MbN: On a MSELECTN
4 MbN: Select the outside line.
5 MMENUN a MbN: Erase a MSELECTN
6 MbN: Yes a MSELECTN a MOFFN
38
For assistance, please visit http://shop.panasonic.com/support
Programming
TGF54xUSA_(en)_1201_ver031.pdf 38TGF54xUSA_(en)_1201_ver031.pdf 38 1/12/2016 5:37:09 PM1/12/2016 5:37:09 PM

Related product manuals