Panasonic KX-TGF572 Quick Guide

Panasonic KX-TGF572

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

PNQW5232ZA PT1116AM0

Printed in Malaysia

Connections

1 Connect the AC adaptor to the power outlet.

Base unit

1

Connect the AC adaptor to the unit by pressing the plug firmly.

2

Fasten the cord by hooking it.

3

Connect the AC adaptor to the power outlet.

4

Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.

5

A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.

Note:

L

Use only the supplied Panasonic AC adaptor PNLV226.

4

4

5

3

1

2

Charger

1

Model No. KX-TGF572/KX-TGF573

KX-TGF574/KX-TGF575

KX-TG785SK

Quick Guide

TGF57x_QG(en).fm Page 1 Monday, November 21, 2016 11:54 AM

Table of Contents

Other manuals for Panasonic KX-TGF572

Operating Instructions104 pages

Questions and Answers:

J
julierochaAug 15, 2025
What to do if my Panasonic KX-TGF572 unit does not work?
- L
  Lee WallerAug 15, 2025
  There are several reasons why your Panasonic Cordless Telephone unit might not be working. First, ensure the batteries are correctly installed. Second, fully charge the batteries. Third, check all connections to ensure they are secure. Fourth, try resetting the unit by unplugging the base unit’s AC adaptor, then reconnecting it. Finally, the handset may not be registered to the base unit; in this case, you should register the handset.
J
Jennifer HouseAug 18, 2025
Why can't I pair my phone to my Panasonic KX-TGF572?
- H
  Holly SnyderAug 18, 2025
  If you're having trouble pairing your cellular phone to the Panasonic Cordless Telephone base unit, there could be several reasons: * First, confirm that your cellular phone supports the hands-free profile (HFP) specification, as compatibility issues may arise. * Second, ensure that the Bluetooth feature on your cellular phone is turned on. * Third, if the Bluetooth technology on your cellular phone is not functioning correctly, try turning your cellular phone off and then on again. * Fourth, if your cellular phone is already connected to another Bluetooth device, such as a Bluetooth headset, disconnect it. * Fifth, some cellular phones may require you to enter the Bluetooth PIN for pairing; confirm that you have entered the correct PIN.
E
Elizabeth KimAug 21, 2025
What to do if my Panasonic KX-TGF572 does not work?
- R
  Robert MartinezAug 21, 2025
  If your Panasonic Cordless Telephone is not working, ensure the batteries are correctly installed and fully charged. Check all connections. Try resetting the unit by unplugging the base unit’s AC adapter, then reconnecting it. Also, ensure the handset is registered to the base unit.
A
Alfred MillerAug 25, 2025
Why I cannot hear a dial tone on my Panasonic Cordless Telephone?
- R
  Renee MendezAug 25, 2025
  If you cannot hear a dial tone on your Panasonic Cordless Telephone, check that the base unit’s AC adapter and telephone line cord are properly connected. If the connections are correct, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider.
S
Stephanie CamposAug 27, 2025
How to turn on Panasonic KX-TGF572 handset?
- L
  Lindsay ReedAug 27, 2025
  If your Panasonic Cordless Telephone handset does not turn on even after installing charged batteries, place the handset on the base unit or charger to turn it on.
T
tommy01Aug 30, 2025
Why does my Panasonic KX-TGF572 Cordless Telephone handset beep and/or flash?
- L
  Lance OrtizAug 30, 2025
  If your Panasonic Cordless Telephone handset is beeping and/or flashing, it indicates that the battery charge is low. Fully charge the batteries.
E
Emily WelchSep 2, 2025
Why does my Panasonic KX-TGF572 base unit beep?
- N
  Nicole WelchSep 2, 2025
  If your Panasonic Cordless Telephone base unit is beeping, it indicates that new messages have been recorded. Listen to the new messages.
J
Jacob FarmerSep 5, 2025
Why I cannot register a handset to a Panasonic KX-TGF572 Cordless Telephone base unit?
- L
  Louis SheppardSep 5, 2025
  If you cannot register a handset to the Panasonic Cordless Telephone base unit, it may be because the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit.
B
bakerstephanieSep 8, 2025
What to do if my Panasonic KX-TGF572 Cordless Telephone batteries still flash after fully charging?
- W
  wallmichaelSep 8, 2025
  If your Panasonic Cordless Telephone batteries still flash, the display shows a battery symbol, or the operating time seems shorter after a full charge, clean the battery ends and the charge contacts with a dry cloth and charge again. If the problem persists, it may be time to replace the batteries.
F
francothomasSep 12, 2025
What to do if Panasonic Cordless Telephone handset does not turn on?
- W
  William NelsonSep 12, 2025
  If the Panasonic Cordless Telephone handset does not turn on even after installing charged batteries, place the handset on the base unit or charger to turn it on.

Panasonic KX-TGF572 Specifications

General

Brand	Panasonic
Model	KX-TGF572
Category	Cordless Telephone
Language	English

Related product manuals

Preview: Panasonic KX-TGF575S

Panasonic KX-TGF575S

Panasonic KX-TGF573S

Preview: Panasonic KX-TGF570 Series

Panasonic KX-TGF570 Series

Preview: Panasonic KX-TGF540 Series

Panasonic KX-TGF540 Series

Preview: Panasonic KX-TGF975

Panasonic KX-TGF975

Preview: Panasonic KX-TGF882

Panasonic KX-TGF882

Preview: Panasonic KX-TGF943

Panasonic KX-TGF943

Panasonic KX-TGF342

Preview: Panasonic KX-TGF340

Panasonic KX-TGF340

Panasonic KX-TGF743

Panasonic KX-TGF343B

Preview: Panasonic KX-TGF372C

Panasonic KX-TGF372C