– 5 –
Frequently asked questions
Question Cause/solution
Why is
_
displayed?
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor
to the base unit.
L
The handset is not registered to the base unit. Register it.
1
Handset:
{
MENU
}
(
13
)
2
Base unit:
Press and hold
{
LOCATOR
}
for about 5 seconds.
3
Handset:
Press
{
OK
}
, then wait until a long beep sounds.
How can I increase the handset
volume level?
L
Press the volume key
{^}
repeatedly while talking.
Why is the conversation noisy or
cutting off?
L
Try to relocate the base unit so that distance to the handset is minimized.
L
If the same problem occurs even if the handset is next to the base unit,
contact an authorized service centre.
Can I add another accessory handset
to my base unit?
L
Yes, you can add up to 6 handsets (including the handset(s) sold with your
base unit) to a single base unit.
Can I keep the batteries charging all
the time?
L
You can leave the handset on the charger anytime. This will not harm the
batteries.
How can I answer a call waiting call
(2nd call)?
L
Press
{
CALL WAIT
}
when you hear the call waiting tone.
TGF87xC_(en-en)_QG_mmdd_verxxx.fm Page 5 Tuesday, February 4, 2020 3:25 PM
To Next Page
Loading...
