Item Meaning
Call sharing mode is off.
(
page 58)
“Greeting only” is
selected. Caller messages
are not recorded. (page 82)
– A cellular call is in
p
rogress on that line.
– The cellular line is
selected for the setting.
Answer by voice command is
o
n. (page 35)
Blocked call (page 38)
Automated call block is set to
“B
lock”. (page 42)
Blocked automated call
(
page 42)
Scam call (page 68)
A Bluetooth headset is
c
onnected to the base unit.
It is ready for use.
A B
luetooth headset is in use.
In use
Answering system is being
u
sed by the handset.
Cell1 in
u
se
Someone is using the
corresponding line.
Cell2 in
u
se
Line in
u
se
*1 Corresponding lines (C1, C2: cellular line,
L
: landline) are indicated next to the item.
If all lines are turned off, no line is
indicated.
CELL indicators on the base unit
T
he CELL indicators show each cellular line
status.
Status Meaning
On A cellular phone is connected.
R
eady to make/receive
cellular calls.
Status Meaning
Flashing
s
lowly
– The cellular line is in use.
– Phonebook entries are
being copied from a
cellular phone (page 70).
– The base unit is searching
for the paired cellular
phone.
– The base unit is pairing a
cellular phone.
– A cellular call is on hold.
– The remote voice assist
feature is in use
(page 73).
Flashing
r
apidly
A cellular call is being
received.
Light off – A cellular phone is not
p
aired to the base unit.
– A cellular phone is not
connected to the base unit
(page 22).
Language settings
Display language
Handset / Base unit
1 MMENUN#110
2 MbN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R The language selected will also be used for
the low battery alert announcement
(page 18).
Voice announcement language
Y
ou can select the language used for the
following features.
– Answering system guidance
– Automated call block guidance
– Telemarketing call block guidance
– Talking Caller ID
For assistance, please visit http://shop.panasonic.com/support
17
Getting Started