Panasonic KX-TGH260 User Manual (English)

Other manuals for Panasonic KX-TGH260

Questions and Answers:

D
dylan72Sep 12, 2025
Why is the 2nd caller’s information not displayed during an outside call on my Panasonic KX-TGH260 Telephone?
- J
  Jennifer HernandezSep 12, 2025
  In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your service provider/telephone company and subscribe to the desired service. After subscribing, you may need to contact your service provider/telephone company again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID).
E
emarshallAug 25, 2025
Why is my Panasonic KX-TGH260 handset beeping and/or flashing?
- M
  Matthew RayAug 25, 2025
  If your handset is beeping and/or flashing, it likely means the battery charge is low. You should fully charge the batteries.
W
William RitterAug 25, 2025
How to fix time shifting on my Panasonic KX-TGH260?
- R
  Ryan HughesAug 26, 2025
  If the time on your unit has shifted, it may be due to incorrect time information from incoming Caller ID. Set the time adjustment to “Manual” (off).
J
Jennifer CollinsAug 26, 2025
Why does my Panasonic KX-TGH260 unit not record new messages?
- S
  Susan ColeAug 26, 2025
  If the unit isn't recording new messages, consider the following: * The answering system is turned off. Turn it on. * The answering system does not answer or record calls from cellular lines. * The message memory is full. Erase unnecessary messages. * The recording time is set to “Greeting only”. Change the setting. * Your service provider/telephone company’s voice mail service may be answering your calls before the unit’s answering system can answer your calls. Change the unit’s number of rings setting to a lower value, or contact your service provider/telephone company. * The answering system will not answer incoming calls while the other devices such as headset or handsets are engaged in a call.
B
brian36Sep 13, 2025
Why can't I have a conversation using the headset with my Panasonic KX-TGH260 Telephone?
- R
  Robert SanchezSep 13, 2025
  If you cannot have a conversation using the headset: * Confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. * Your Bluetooth headset is not paired. Pair it. * Turn your headset off, then turn it on and try again.
T
Tommy DavidSep 14, 2025
Why can't I connect my headset to the base unit of my Panasonic KX-TGH260?
- Q
  qburtonSep 14, 2025
  If you cannot connect your headset to the base unit: * Confirm that your headset is turned on. * If your headset is already connected to another Bluetooth device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. * Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). * The headset has not been paired to the base unit. Pair the headset.
A
abigailgarzaSep 6, 2025
What to do if I cannot make local calls with the Panasonic KX-TGH260 Telephone handset using a cellular line?
- G
  Gary ReedSep 6, 2025
  If you cannot make local calls with the handset using a cellular line, you may need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls.
S
Steven SosaSep 6, 2025
Why can't I make or answer cellular calls with my Panasonic KX-TGH260 Telephone handset?
- D
  Dr. Katie PrestonSep 7, 2025
  If you are unable to make or answer cellular calls with the handset, consider the following: * Depending on the cellular phone’s compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. * Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). * The cellular phone is being used separately from your system.
C
Christopher ClementsSep 1, 2025
Why is caller information not announced on my Panasonic KX-TGH260 Telephone?
- D
  devin10Sep 1, 2025
  If caller information isn't being announced, here are some things to check: * The ringer volume for landline might be turned off. Adjust the ringer volume. * The ringer volume for cellular line might be turned off. Adjust the ringer volume. * When one handset is selected to ring for cellular calls, other units do not announce caller information. * The Talking Caller ID feature might be turned off. Turn it on. * The ring as cell mode is set to “On (without Talking CID)”. To change the mode, see page 17. * The number of rings for the answering system is set to “2 rings” or “Toll saver”. Select a different setting. * Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call.
J
Joshua RodriguezAug 30, 2025
Why is the handset display blank or dark on my Panasonic KX-TGH260 Telephone?
- C
  cfryeAug 30, 2025
  If your handset display is blank or dark, it could be due to these reasons: * The handset is in screen saver mode. To activate the display, press M N during a call or MOFFN at other times. * “LCD backlight” is set to “Off” while on charge. You can change this setting.