Panasonic KX-TGP500 - Page 10

10
3. Activate your DOT Service
• Select Menu > IP Service > Call Features > Settings > Authentication
• Select ID and enter details, then select Save. You will hear a 2 second beep if
successfully saved.
• To type, use the keypad. Select ABC to toggle between letters and
numbered keypad.
• Enter the password and select Save. You will hear a 2 second beep if
successfully saved.
• Press OFF to complete the activation process. The status indicator flash red,
amber then remains solid green when the set up is complete.
Important: Refer to your DOT Configuration Summary for the User ID and
Password for the device type: TGP500. Additional KX-TPA50 cordless phones do
not require IDs and Passwords – these are displayed in the Configuration
Summary as NULL.
If you are unable to connect successfully, check that you have entered the
cored ID and Password by repeating the above steps to re-enter your details.
Restart by disconnecting and reconnecting the base unit from the power supply.