Panasonic KX-TGP500 - Making and Answering Calls (Handset); Basic Call Operations

13
Each phone registered to the Base Unit will be connected to all the phone
numbers. Press the LINE button on each phone to display all the phone numbers
accessible for each cordless phone.
6. Set up phones to start making calls
Assign / Un-assign an incoming call number to a phone:
• Select MENU > IP Service > Call Features > Settings > Incoming Call.
• Select LINE on the cordless phone to view the available phone numbers.
• Phone numbers marked with a “*” are assigned as incoming numbers to the
handset.
• Select the desired phone lines to assign / un-assign for incoming calls.
• Select Yes to assign incoming calls to the phone. This phone will ring on
incoming calls to the selected phone number.
• Select No to un-assign the incoming number.
Repeat these steps on each cordless phone.
Assign / Un-assign an outgoing call number to a phone:
• Select MENU > IP Service > Call Features > Settings > Outgoing Call > Default.
• Select LINE 1 – 4 or LINE 5 – 8 to view phone numbers.
• Select the desired phone line to assign / un-assign for outgoing calls.
• Select Yes to assign outgoing calls to the phone.
• If assigned, calls from this handset will display the selected phone line.
Repeat these steps on each cordless phone.
Please note: If you are unable to make a call (“invalid”), check that “Line 1 – 4 /
Line 5 – 8 are marked with * to ensure lines are available for outgoing calls.