Panasonic KX-TGP500 - Base Unit Call Management

19
Import the contact list to each phone
• On the phone, select MENU > IP Service.
• Select Network Settings > Embedded Web.
• Select On.
• There will be a long beep and you will be returned to the previous Menu.
• Select IP Settings to display the Base Unit IP Address.
• Open an internet browser page on your PC
• Type the Base Unit IP Address in the address bar and press Enter.
• When prompted, enter the following details:
User name – Admin
Password – Telstra
• Press Enter.
• The following page will be displayed
Please note: You need to be connected to the network via a recommended
DOT router.
Troubleshooting: If you are unable to get to the page (as shown), repeat the
following steps to ensure Embedded Web is switched ON.
• On the phone, select MENU > IP Service.
• Select Network Settings > Embedded Web
• Select ON.