To supervise transfer (transfer with
consultation to another party)
• Press MENU during a call.
• Select Intercom to display all the
Panasonic KX series handsets.
• Scroll and select the other party’s handset.
• Press the CALL soft key.
• Wait till the other party answers the
call and announce the call.
• Press OFF to complete transfer.
Transfer a call to another handset
(with a different phone number)
To blind transfer (transfer without
announcing the call prior to transfer)
• Press MENU during a call.
• Scroll down to Blind Transfer and
press SELECT.
• Enter the other party’s phone number
to complete blind transfer.
• Press OFF to complete transfer.
To supervise transfer (transfer with
consultation to another party)
• Press MENU during a call.
• Scroll down to Transfer and press SELECT.
• Enter the other party’s phone number
and press CALL.
• To complete the transfer press TRANS.
Hold calls
• To put an active call on hold press the
HOLD soft key, ‘Line on hold’ will display
on the screen.
• To resume the call from hold press the
HOLD soft key again.
Conference calls
• To create a conference call while on active
call press the MENU soft key.
• Scroll down to Conference and press
SELECT.
• Wait for the continuous dial tone and enter
the new party’s number. That handset will
automatically dial.
• When the new party answers the call press
the CONF soft key to connect all parties.
• If the new party does not answer, press
CANCEL twice to return to the active call.
Call Forwarding and Call Waiting
There are 3 Call Forwarding options
which can be set from your handset:
Call Forward-Always, Call Forward-
No Answer and Call Forward-Busy.
Call Forward-Always
1. Pick up handset and enter the assigned
code
7
2
and press the CALL button.
2. You’ll be prompted to enter the phone
number to which calls will be forwarded.
3. Hang up handset. Call Forward-Always
is now activated.
To deactivate, repeat these steps using
the code
7
3
.
Call Forward-Busy
• Follow the Call Forwarding instructions
above but use code
9
0
to turn it on,
and code
9
1
to turn it off.
Call Forward-No answer
• Follow the Call Forwarding instructions
above but use code
9
2
to turn it on,
and code
9
3
to turn it off.
Call Waiting
• Lift the telephone handset and enter the
assigned code
4
3
. The Call Waiting
feature is now turned on.
• To turn it off, repeat these steps using
the code
#
4
3
.
134124 FEB15
To Previous Page
Loading...
