45
KX-TGP500B04/KX-TPA50B04
8.3.1.3. PC Setting
Preparation:
• PC
• Batch file CD-ROM for settings: PQZZGT1500M
• Base Unit / Handset
1. Install the TeraTerm
Install the "Teratermpro.exe" to your PC from internet site. Refer to the "readme" of the TeraTerm for installation process etc.
2. Install the USB Driver
2-1. Extract the "Driver.zip" to your PC.
2-2. Activate "DrvInstSetup.exe" in the "Driver" folder, and follow the wizard.
2-3. When the following dialog appears, please connect the Base Unit, PC, USB cable and AC adaptor each.
3. Install the Test mode application
3-1. Confirm the USB COM port number.
• This port number is needed at TeraTerm setting and Initialization of the Test mode application.
(1) Open the Control Panel. (3) Click the "Modems" tab.
(2) Open the "Phone and Modem Options".
(4) Confirm the Port number.
To Next Page
Loading...
