Basic Operations
14
Note:
L You can also dial the phone number
after lifting the corded handset.
L For further details, please read the
User Guide on the Panasonic Web
site. See page 3 for Panasonic URL.
Using the speakerphone
1
Dial the phone number and press
{SP-PHONE}.
L The unit selects the default line
configured by your administrator.
L You can also select the line
manually as follows:
{LINE} i {V}/{^}: Select the
desired line. i Press {CALL} or
{SP-PHONE}.
2 When the other party answers,
speak into the base unit
microphone.
L Speak alternately with the other
party.
3 When you finish talking, press {SP-
PHONE}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch to the receiver, lift the
corded handset.
Adjusting the receiver or
speaker volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial
list
The last 10 phone numbers dialled are
stored in the redial list in each unit (each
32 digits max.).
1 {REDIAL}
2 {V}/{^}: Select the desired phone
number.
3 Lift the corded handset or press
{SP-PHONE}.
L If {SP-PHONE} is pressed and
the other party’s line is engaged,
the unit automatically redials
multiple times. While the base unit
is waiting to redial, the SP-
PHONE indicator on the base unit
flashes. To cancel, press {EXIT}.
Answering calls using
the handset
When a call is being received, the ringer
indicator on the handset flashes rapidly.
1 Lift the handset and press {CALL},
{C}, or {s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2 When you finish talking, press
{OFF} or place the handset on the
charger.
Adjusting the handset ringer
volume
■ While the handset is ringing for an
incoming call:
Push the joystick up or down
repeatedly to select the desired
volume.
■ Programming the volume
beforehand:
1 {MENU} (centre of joystick) i
{#}{1}{6}{0}
2 {V}/{^}: Select the desired
volume.
3 {SAVE} i {OFF}
To Next Page
Loading...
