Panasonic KX-TH1201 - Setting up the Unit before Use

Temporary Confidential
Preparation
16
For assistance, please visit http://www.panasonic.com/help
Setting up the unit
before use
Display language
You can select either “English” or
“Español” as the display language.
The default setting is “English”.
1 {MENU} i {#}{1}{1}{0}
2 {V}/{^}: Select the desired setting.
3 Press the right soft key to save. i
{OFF}
Voice guidance language
You can select either “English” or
“Español” as the voice announcement
language of the talking alarm clock and
talking battery alert. The default setting
is “English”.
1 {MENU} i {#}{1}{1}{2}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Date and time
1
{MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2008
{0}{7}{1}{5}{0}{8}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9}{3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {Save} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Available for:
KX-TH1211/KX-TH1212
TH12XX.book Page 16 Wednesday, December 19, 2007 4:17 PM