Panasonic KX-TH1201 - Programming; Programmable Settings

Temporary Confidential
Programming
26
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 26)
– using the direct commands (page 29)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {Select}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {Select}
L In some cases, you may need to select from sub-menu 2. i {Select}
4 Press {V} or {^} to select the desired setting. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 29 to page 31 for the default setting.
KX-TH1201
Main menu Sub-menu 1 Sub-menu 2 Page
Block calls
*1
––33
Night mode On/Off –34
Start/End –34
Ringer for cell Ringer volume ––
Ringer tone ––
Set date & time Date and time
*1
–16
Alarm –34
Talking
CallerID
––37
Customer
support
––35
TH12XX.book Page 26 Wednesday, December 19, 2007 4:17 PM