Panasonic KX-TH1201 - Page 19

Temporary Confidential
Link to Cell
19
For assistance, please visit http://www.panasonic.com/help
Selecting which handset to
ring for cellular calls
You can select which handset rings
when you receive a call to a registered
cellular phone. The default setting is
“0(All)”.
1 {MENU} i {#}{6}{2}{7}
2 {V}/{^}: Select the desired cellular
phone.
L When only 1 cellular phone is
registered, go to step 3.
3 {Select}
4 {V}/{^}: Select the desired
handset(s). i {>}
L The selected handsets are
indicated by Q.
L To cancel a selected handset,
press {>} again.
5 {Save} i {OFF}
Turning on the discoverable
mode
When the discoverable mode is turned
on, the base unit may be seen by other
Bluetooth devices. The default setting is
“Off”.
1 {MENU} i {#}{6}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Deregistering a cellular phone
A handset can cancel a registered
cellular phone from the base unit.
1 {MENU} i {#}{*}{1}{3}{4}
2 {3}{3}{5} i {OK}
L When only 1 cellular phone is
registered, go to step 4.
3 {V}/{^}: Select the desired cellular
phone.
4 {Select}
L After the cellular phone is
deregistered, the handset beeps
and the LINK TO CELL indicator
is turned off.
TH12XX.book Page 19 Wednesday, December 19, 2007 4:17 PM