9
Preparation
Connections
Connect the handset cord (1) to the handset and the unit. Connect the telephone line cord
until it clicks into the unit and telephone line jack (2).
After line connection, lift the handset to check for a dial tone.
≥ Use only a Panasonic handset for KX-TS560MX and KX-TS580MX.
≥ Use only the supplied telephone line cord. Using another telephone line cord may not allow the unit
to work properly.
If you subscribe to a DSL /ADSL service
Please attach a DSL /ADSL filter (contact your DSL /ADSL provider) to the telephone line
between the unit and the telephone line jack in the event of the following:
s noise is heard during conversations.
s Caller ID features (page 21) do not function properly.
LINE
1
To single-line telephone jack
2
D S L / A D S L f i lte r
To single-line
telephone jack
KX-TS580MX.book Page 9 Friday, August 1, 2008 3:34 PM
To Next Page
Loading...
