2.3 Subscribers Features
Feature Manual 59
2.3.31 Toll Saver (APT/DPT Integration Only)
Description
Allows a subscriber to check his or her mailbox from preprogrammed Caller ID numbers, DID number
or the telephone number specified to the preprogrammed trunk (CO line) number without incurring
telephone charges.
Conditions
• DID number setting for this feature is only available for the following PBXs using DPT Integration.
– KX-TD816 (P311Q or higher)
– KX-TD1232 (P211Q or higher)
– KX-TD500 (V4M or higher)
– KX-TDA series* (MPR Version 1.1 or higher)
* except KX-TDA50
Programming Manual References
2.1.10 Automatic Log-in
"Toll Saver" in 2.4.3 Parameters
Feature Manual References
2.3.2 Automatic Log-in (APT/DPT Integration Only)
Subscriber's Manual References
5.16 Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
To Next Page
Loading...
