Technical Information
Date:
Tuesday October 20
th
2009
Documento. TN-KXT-TVA-Notification
Title: KX-TVA50/KX-TVA200 Voicemail System Device Notification
Associated Systems: KX-TVA50, KX-TVA200
Associated Tech Note: None
Application: Program instruction on KX-TVA50/KX-TVA200 Voicemail Message Device Notification
Topics Covered:
• Notification Parameter Options
• Notification Schedule Settings
• Multi Device Notification Timer Settings
1. Notification parameter options and selections
The voicemail system is capable of notifying the mailbox subscriber when a new message is received by
message waiting lamp and/or devices such as telephone (cellular) or beeper.
Note: There is a maximum of 3 devices that can be programmed for notification purposes per mailbox.
Message Waiting Lamp
Enable: Light message waiting lamp when a new message is left.
Disable: No message waiting lamp indication.
Beeper Callback No Entry Mode
Enable: allows caller to enter his/her call back number either before or after leaving a message.
Disable: Leaving call back number is not allowed.
Device Notification for Unreceived Message
YES: Voicemail notifies mailbox subscriber again IF any message left in the mailbox is unchecked.
NO: Voicemail notifies only once on a new message.
PG. 1
Please continue to next page
Panasonic Telephone Systems
www.voicesonic.com
Phone 877-289-2829
KX-TVA50
KX-TVA200
To Next Page
Need help?
General
