Programming
22
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 22)
– using the direct commands (page 24)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
1 (centre of navigator key)
2 Press {V}, {^}, {>}, or {<} to select the desired main menu. i M
3 Press {V} or {^} to select the desired item in sub-menu 1. i M
L In some cases, you may need to select from sub-menu 2. i M
4 Press {V} or {^} to select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L See page 24 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller List
j
––34
Answer System
I
Message List –42
Play New Msg. –42
Play All Msg. –42
Erase All Msg.
*1
–43
Greeting Start REC
*1
41
Play Greeting 41
Default
*1
41
Settings Number of Rings
*1
44
Recording Time
*1
45
Remote Code
*1
43
Call Screening 40
Answer On
*1
–40
Answer Off
*1
–40
TG8521E(e).book Page 22 Wednesday, March 17, 2010 3:39 PM
To Next Page