Programming
24
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
Programming using the direct commands
1
1 (centre of navigator key) i {#}
2 Enter the desired code.
3 Select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
Initial Setup
U
Keytones ––
Call Restrict
*1
–30
Auto Talk –17
Line Setup Recall/Flash
*1
17
Privacy Mode
*1
––
Base Unit PIN
*1
–30
Repeater Mode
*1
–32
Register Register H.set 31
Select Base –32
Language Display 14
Feature Code Setting System
*1
Page
Caller List {2}{1}{3} ––34
Intercom {2}{7}{4} ––47
Set Date/Time {1}{0}{1} – r 14
Memo Alarm {7}{2}{0}{1}: Alarm1
{2}: Alarm2
{3}: Alarm3
–28
Time
Adjustment
*2
{2}{2}{6}{1}: <Caller ID>
{0}: Manual
r –
Ringer Volume
*3
(Handset)
{1}{6}{0}{1}–{6}: Level 1–6 <6>
{0}: Off
––
Ringer Volume
(Base unit)
{*}{1}
{6}{0}
{1}–{6}: Level 1–6 <3>
{0}: Off
r –
Ringtone
*4,
*5
(Handset)
{1}{6}{1} <Ringtone 1>––
Night Mode
(On/Off)
{2}{3}{8}{1}: On {0}: <Off>–28
Main menu Sub-menu 1 Sub-menu 2 Page
TG8521E(e).book Page 24 Wednesday, March 17, 2010 3:39 PM
To Next Page