109
Focus, Brightness (Exposure) and Color tone Settings
Setting the ISO Sensitivity
Recording mode:
Set ISO sensitivity (sensitivity to lighting).
1
Press [ ] button ( )
2
Select the ISO sensitivity by rotating the
rear or front dial
ISO sensitivity
• You can change the setting content on the ISO
sensitivity screen from [ISO Displayed Setting] in the
[Custom] ([Operation]) menu. (→198)
1
25
2
0
AUTO
ISO sensitivity is automatically set in a range up to 3200
*
1
depending
on the brightness of a subject.
(Intelligent ISO)
ISO sensitivity is automatically set in a range up to 3200
*
1
depending
on the movement and brightness of a subject.
• The shutter speed is not fixed when the shutter button is pressed
halfway. It is continuously changing to match the movement of the
subject until the shutter button is pressed fully.
[L.80]
*
2
/ [L.100]
*
2
/
from [125] to
[12800] / [H.25600]
*
2
ISO sensitivity is fixed at the selected setting.
*
1
When [ISO Auto Upper Limit (Photo)] in the [Rec] menu is set to [AUTO].
*
2
Only when [Extended ISO] in the [Custom] ([Exposure]) menu is [ON].
3
Press [MENU/SET] to set
• You can also press the shutter button halfway to set.
To Next Page
Loading...
