43
Basics
Basic Operation
Control ring
You can use the control ring to change the settings for recording.
Mode dial
Control ring
*
1
Step Zoom
Picture effects change
Step Zoom
Picture effects change
*
1
When Manual Focus is set, the control ring is assigned to focus adjustment.
■
Changing the settings assigned to the control ring
→ [Custom] → [Operation] → [Control Ring]
• [Normal]
*
2
• [Zoom]
• [Step Zoom]
• [Exposure Comp.]
• [Sensitivity]
• [White Balance]
• [AF Mode]
• [Photo Style]
• [Filter Effect]
• [Aspect Ratio]
• [Highlight Shadow]
• [i.Dynamic]
• [i.Resolution]
• [Flash Mode]
• [Flash Adjust.]
• [Not Set]
*
3
*
2
To return to the default setting, select [Normal].
*
3
If you do not use the control ring, select [Not Set].
●
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode.
To Next Page
Loading...
