41
Basics
Basic Operation
Front Dial/Rear Dial
Rotating:
Selection of items or setting of values is performed during the
various settings.
Front Dial
Rear Dial
Allows you to set the aperture, shutter speed, and other settings when in [ ] / [ ] / [ ] /
[ ] modes.
Mode dial Front dial Rear Dial
Program Shift Program Shift
Aperture value Aperture value
Shutter speed Shutter speed
Aperture value Shutter speed
Temporarily changing the operation of the front/rear dials ([Dial Operation
Switch])
Preparations
Assign [Dial Operation Switch] to the function button
(→54)
• [Dial Operation Switch] is assigned to [Fn5] at the time of purchase.
1
Press the function button
• A guide will be displayed showing the items temporarily assigned
to the front/rear dials.
• If no operations are performed, the guide will disappear in a few
seconds.
2
Rotate the front/rear dials while the guide is displayed
3
Press [MENU/SET] and set
• You can also complete this step by performing either of the
operations below:
– Press the shutter button halfway
●
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] ([Operation]) menu.
(→42)
To Next Page
Loading...
